MATEST PRODUCTS
Address:
"Hellenic Petroleum" Building
274A, Tosin Bunar str.
New Belgrade
11070
Telephone:
+381112284574
Rebar Detection System - Profometer 5+
The Profometer 5+ cover meter is a sophisticated device for the non destructive location of rebars and for the measurement of concrete cover and bar diameters, using the eddy current principle with pulse induction as the measuring method. As well as detecting the rebar diameter accurately to the millimeter by only one measuring procedure, the cover meter Profometer 5+ offers the transmission of the measured data to a PC. This supersedes the time consuming business of note taking, allowing the user to focus on the essential. Proceq offers two different models of the Profometer 5+ cover meter, each designed to meet the individual needs of the customer:
- Profometer 5+ cover meter Model S (Basic Unit) performs the following functions:
- Locating rebar
- Concrete cover meter
- Storing individual cover values and statistical evaluation
- Determining the bar diameters
- The Profometer 5+ cover meter Model Scanlog has all the function of the model S but offers additionally the following features:
- 2-dimensional display of rebar layout
- 2-dimensional display and mapping of concrete cover values
The cover meter meets the customers' needs for digital rebar location.
Corrosion Analyzing Instrument – Canin+
Corrosion Analysis allows the contractor to limit the maintenance tasks on reinforced concrete to the areas where it is really required. The Canin+ is the fastest instrument for corrosion analysis, offering a practical, cost-effective approach to the investigation of reinforced concrete. Corrosion analysis with the Canin+ allows a rapid, comprehensive test of the site and provides a fast assessment of locations where corrosion is likely to take place. Corrosion analysis with the half-cell potential method: accurate field potential measurements aid in detecting active corrosion in rebars.
Rebar Detector and Covermeter - Profoscope
The Profoscope is a versatile, fully-integrated rebar detector and cover meter with a unique real-time rebar visualization allowing the user to actually “SEE” the location of the rebar beneath the concrete surface to a maximum depth of 180 mm. This is coupled with rebar-proximity indicators and optical and acoustical locating aids. Rebar diameter can also be estimated within the specified testing range. The Profoscope combines these unique features in a compact, light device that allows the user to operate this rebar detector with one hand making the task of locating rebars a simple and efficient process. In addition, Proceq’s rebar detector convinces through its intuitive user interface making rebar detection easy.
Metal Hardness Tester – Equostat 3
The Equostat 3 was developed for accurate, rapid and reproducible metal hardness testing. It features excellent sensitivity through small penetration of a few µm and is therefore particularly suited for testing metal hardness of surface layers on scratch-sensitive and polished parts or on thin parts, profiles and pipes with a wall thickness that is below 2 mm (0.08”).
The Equostat 3 works well in outdoor, factory and lab environments. It has only very few requirements on test piece geometries. The Equostat 3 probe can be connected directly to a laptop or a PC. Alternatively, the probe plugs into the Equotip 3 indicating device to combine the Rockwell principle of Equostat with the Leeb rebound principle of Equotip 3 to become the most versatile hardness tester. Live user guidance dialogs enable the user to obtain very accurate and highly reproducible measurements.